Teledyne T100, Instruction Manual, Page: 334 / 404

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
APPENDIX A - Version Specific Software Documentation
05036 Rev D A-17
SETUP VARIABLE
NUMERIC
UNITS
DEFAULT
VALUE
VALUE RANGE DESCRIPTION
BAUD_RATE2 — 19200 300,
1200,
2400,
4800,
9600,
19200,
38400,
57600,
115200
RS-232 COM2 baud rate. Enclose
value in double quotes (“) when setting
from the RS-232 interface.
MODEM_INIT2 — “AT Y0 &D0
&H0 &I0
S0=2 &B0
&N6 &M0 E0
Q1 &W0” Any character in
the allowed
character set. Up to
100 characters
long. RS-232 COM2 modem initialization
string. Sent verbatim plus carriage
return to modem on power up or
manually. Enclose value in double
quotes (“) when setting from the RS-
232 interface.
RS232_PASS Password 940331 0–999999 RS-232 log on password.
MACHINE_ID ID 100 0–9999 Unique ID number for instrument.
COMMAND_PROMPT — “Cmd> ” Any character in
the allowed
character set. Up to
100 characters
long.
RS-232 interface command prompt.
Displayed only if enabled with
RS232_MODE variable. Enclose value
in double quotes (“) when setting from
the RS-232 interface.
TEST_CHAN_ID — NONE NONE,
PMT READING,
UV READING,
VACUUM
PRESSURE
3
,
SAMPLE
PRESSURE,
SAMPLE FLOW,
RCELL TEMP,
O2 CELL TEMP
10
,
CHASSIS TEMP,
IZS TEMP
1
,
PMT TEMP,
HVPS VOLTAGE
Diagnostic analog output ID. Enclose
value in double quotes (“) when setting
from the RS-232 interface.
REMOTE_CAL_MODE — LOW LOW,
HIGH,
CO2
11
,
O2
10
Range to calibrate during contact-
closure and Hessen calibration.
Enclose value in double quotes (“)
when setting from the RS-232
interface.
PASS_ENABLE — OFF OFF, ON ON enables passwords; OFF disables
them.
RCELL_CYCLE Seconds 2 0.5–30 Reaction cell temperature control cycle
period.
RCELL_PROP 1/ºC 0.3 (prop.
band = 3.3
ºC) 0–10 Reaction cell temperature PID
proportional coefficient.