Teledyne T100, Instruction Manual, Page: 150 / 404

Remote Operation & Advanced Features Teledyne ML - T100 UV Fluorescence SO2 Analyzer
150
5.2.2.7. RS-232 REPORT FUNCTION
The M DAS can automatically report data to the communications ports, where they can
be captured with a terminal emulation program or simply viewed by the user.
To enable automatic COMM port reporting, follow the instruction shown in Figure 5-11,
then press:
Edit Data Channel Menu
SETUP X.X 0) CONC: ATIMER, 2, 4032, R
PREV NEXT INS DEL
EDIT PRNT EXIT
Exits to the main
Data Acquisition
menu
SETUP X.X NAME:CONC
<SET
SET> EDIT PRINT EXIT
SETUP X.X RS-232 REPORT: OFF
<SET SET>
EDIT PRINT EXIT
ENTR accepts the new
setting and returns to the
previous menu.
EXIT ignores the new setting
and returns to the previous
menu.
SETUP X.X RS-232 REPORT: OFF
OFF ENTR EXIT
Toggle to turn
reporting ON or OFF
Press SET>
until…
Figure 5-18: DAS
– RS-232 Report Function
5.2.2.8. COMPACT REPORT
When enabled, this option avoids unnecessary line breaks on all RS-232 reports. Instead
of reporting each parameter in one channel on a separate line, up to five parameters are
reported in one line, instead.
5.2.2.9. STARTING DATE
This option allows a user to specify a starting date for any given channel in case the user
wants to start data acquisition only after a certain time and date. If the
Starting Date is
in the past, the DAS ignores this setting.
5.2.2.10. DISABLING/ENABLING DATA CHANNELS
Data channels can be temporarily disabled, which can reduce the read/write wear on the
disk-on-module. The ALL_01 channel of the T100, for example, is disabled by default.