Teledyne T100, Instruction Manual, Page: 301 / 404

Teledyne ML - T100 UV Fluorescence SO2 Analyzer Troubleshooting & Repair
06807A(DCNxxxx) 301
QUESTION ANSWER

10%. Section 8.3.6 includes detailed instructions on performing a check of the
sample gas flow.
How often do I need to change the
particulate filter? Once per week. Table 8-1 contains a maintenance schedule listing the most
important, regular maintenance tasks.
What is the averaging time for an
T100? The default averaging time, optimized for ambient pollution monitoring, is 240
seconds for stable concentrations and 20 seconds for rapidly changing
concentrations; Refer to 9.7.1 for more information.
My analyzer has the optional, user -
configurable analog output channels.
How do I program and use them? Instructions for this can be found in the Manual Addendum for Configurable Analog
Output, PN 06270.
How long does the sample pump last? The sample pump should last about one year and the pump diaphragms should to
be replaced annually or when necessary. Use the PRES test function displayed via
the front panel to see if the diaphragm needs replacement (refer to Section 10.1.2).
Do I need a strip chart recorder or
external data logger? No, the T100 is equipped with a very powerful internal data acquisition system.
Section 5.2 describes the setup and operation in detail.
10.9. TECHNICAL ASSISTANCE
If this manual and its trouble-shooting / repair sections do not solve your problems, technical assistance may be
obtained from Teledyne Monitor Labs, Inc., Customer Service, 35 Inverness Drive East, Englewood, CO 80112.
Phone: 1-800-846-6062. Fax: 1-303-799-4853. Email:
tml_support@teledyne.com
Before you contact customer service, fill out the problem report form in Appendix C, which is also available online
for electronic submission at
http://www.teledyne-ml.com/manuals.asp
User Notes: