Teledyne T100, Instruction Manual, Page: 31 / 404

Teledyne ML - T100 UV Fluorescence SO2 Analyzer
Specifications, Approvals & Compliance
31
Table 2-3: CO
2
Sensor Option Specifications
2.2. EPA EQUIVALENCY DESIGNATION
The T100 Analyzer is designated as Reference Method Number EQSA-0495-100 as per
40 CFR Part 53 when operated under the following conditions:

Range: Any range from 50 parts per billion (ppb) to 10 parts per million (ppm).

Ambient temperature range of 5
o
C to 40
o
C.

Line voltage range of 100-120 VAC or 220-240 VAC, at 50 or 60 Hz.

Sample filter: Equipped with PTFE filter element in the internal filter assembly.

Sample flow of 650 +/- 65 cm
3
/min.

Vacuum pump (internal) capable of 14"Hg Absolute pressure @ 1 slpm or better.

Software settings:
Dynamic span OFF
Dynamic zero OFF
Dilution factor OFF
AutoCal ON or OFF
Dual range ON or OFF
Auto-range ON or OFF
Temp/Pressure compensation ON
Under this designation, the analyzer may be operated with or without the following
optional equipment:

Rack mount with chassis slides.

Rack mount without slides, ears only.

Zero/span valve options.

Internal zero/span (IZS) option with either:

SO
2
permeation tube - 0.4ppm at 0.7 liter per minute; certified/uncertified.

SO
2
permeation tube - 0.8 ppm at 0.7 liter per minute; certified/uncertified.
Under the designation, the IZS option cannot be used as the source of
calibration.
Span Drift (7 days) <± 0.1% CO
2
Accuracy <± (0.02% CO
2
+ 2% of reading)
Linearity <± 0.1% CO
2
Temperature Coefficient <± 0.01% CO
2
/°C
Rise and Fall Time <60 seconds to 95%
1
As defined by the USEPA
2
Defined as twice the zero noise level by the USEPA