Set It Up and Get It Running 2-13
Switch Between Front Feed and Bottom Feed
The tractors may be easily switched between front and bottom feed. The tractor assembly
swings from hooks at the top.
At the front of the printer, pull the bottom of the acoustic door outward and slide the top inward
into the storage position.
Find the gear covers.
The bottom tractor shaft is square with a gear cover on each end. Spring-loaded balls in each
gear cover engage locating pins in the sides of the printer.
Front feed to bottom feed
Push down firmly on the square shaft near the ends. The assembly will pop free of the locating
pins. Swing the assembly down until it snaps into the locating pins for bottom feed. Wiggle the
ends of the assembly to ensure the pins are engaged.
Bottom feed to front feed
Pull up firmly on the square shaft near the ends. The assembly will pop free of the locating
pins. Swing the assembly up until it snaps into the locating pins for front feed. Wiggle the
ends of the assembly to make sure the pins are engaged.
