Set It Up and Get It Running 2-15
Open the doors on both tractors.
Check the leading edge of the paper.
There must not be any tears wrinkles.
Put paper in the home position tractor.
For the rear path, the side of the paper to be printed on faces down. Sprocket-feed holes in
the paper should engage three to five of the pins of the tractor belt. Make sure that the same
number of pins are engaged on both tractors.
Close the home-position tractor door …
Move the far tractor as necessary to fit your paper.
If necessary, pull the far tractor locking lever forward and adjust the far tractor’s horizontal
position so that it matches the width of the paper.
TRACTOR
DOOR
