3860/80 User’s Manual
2-2
Power Cords
Do not use two-wire extension cords or adapters that allow connection to ungrounded outlets.
A 6.5-foot power cord is shipped with the printer. The power cord included with printers sold
for 115V installations in the U.S. and Canada is ready to use. International model printers are
shipped with a power cord, which can be used in the destination country.
For units to be operated at 115V, use a UL Listed/ CSA Certified three-conductor cord set,
#18 AWG minimum, Type SVT or SJT. The maximum length is 15 feet. There must be a
NENIA 5-15P (parallel blade, grounding type) plug on one end and a CEE 22/5 socket on the
other end. The cord set should be rated 10A, 250V and have a grounding plug with safety
approvals appropriate for the country in which the equipment will be installed.
For units to be operated at 230V inside US. and Canada, use a UL Listed/CSA Certified three-
conductor cord set, #18 AWG minimum, Type SVT or SJT. The maximum length is 15 feet.
There must be a NEMA 6-15P (tandem blade, grounding type) plug on one end and a CEE
22/5 socket on the other end. The cord set should be rated IOA, 25OV and have a grounding
plug with safety approvals appropriate for the country in which the equipment will be installed.
For units to be operated at 23OV outside the US. and Canada, use a three-conductor cord
set, EUR-H05VV-FG31,0 minimum, with a CEE 22/5 socket on one end. The cord set should
be rated 10A, 250V and have a grounding plug with safety approvals appropriate for the
country in which the equipment will be installed. The cord set should be marked HAR.
