Emulation and Software Options
B-3
Software Options
The software options that can be set from the Printed Menu:
No. Function
1
Back up to top of oversize characters.
2
Back up to top of bar codes.
*3
Print bar codes using a staggered dot pattern for better throughput
and sharper resolution.
4
Print guard bars on applicable bar codes.
5
SI/SO control code toggles bar code and oversized.
6-8 Reserved
9
Base values for Printed Menu operation, ENB = decipoints, DIS =
inches
10 Reserved
*11
Go to offline on a fault condition
*12
Bottom margin tracks form length.
*13
A paper out fault is automatically cleared when the paper is
detected.
14
Load format assigned to current paper path on power-up.
15 Reserved
16
Map Danish/Norwegian character substitutions (155 and 157
decimal) to all character sets.
17
Receive data in local state.
*18
Carriage speed reduced to 70% of normal for 12 dot high (line
draw) characters and graphics.
19
Send a busy signal when offline after every 20 characters.
20 Reserved
21
Strip leading and trailing white space from POSTNET bar codes.
Also changes density to 24 bars/inch.
22
Unidirectional printing of postnet
23
Home the print head in auto view or tear off mode
24
Slow vertical slew for autoview
25-36 Reserved
* Enabled when printer is shipped from factory or after ISU
