Interface
12-7
Parallel Data Cable
This parallel interface data cable requires a 36-pin male connector (Amphenol
part number 57-30360 or equivalent) to mate with the female
connector on the
back of the printer.
NOTE:
Maximum output power for pins 18 and 35 combined is +5 volts, 1.0 amps.
Parallel Interface Pin Assignments
Pin Signal
Active
Status
1
Strobe
Active high or low input
2
Data Bit 1
3
Data Bit 2
4
Data Bit 3
5
Data Bit 4
6
Data Bit 5
7
Data Bit 6
8
Data Bit 7
9
Data Bit 8
10
ACK
Active high or low output
11
Busy
Active high or low output
12
Paper out
Active high output
13
Select
Active high output
14
Auto LF XT
Not supported
15,30,33,3
4
Unused
16,19-29
Signal ground (0V)
17 Frame
ground
18
+5V, 500 mA (max.)
31
Prime
Active low input
32
Fault
Active low output
35
+5V, 500 mA (max.)
36
Select In
Not supported
19
1
36
18
