3860/80 User’s Manual
2-20
Menu
Enter
Press MENU to get into the LCD menu.
8
Press and release the UP ARROW key until the LCD displays
Prog: Utility. Use the DOWN ARROW key to go back if needed.
Prog: Utility
This is the menu selection that contains the test print selection.
Menu
Enter
Press ENTER
Utilit : PrntStat
8
Press and release the UP ARROW key until the LCD displays
Utilit:TestPrn
. Use
the DOWN ARROW key to go back if needed.
Utilit:TestPrn
This is the selection for the test print.
Menu
Enter
Press ENTER
Test P:8” Max
This is the currently selected test pattern width.
8
Press the UP ARROW key to toggle between 8 inch and 13.6 inch test pattern
widths. If you set a right hand margin, that value will take precedence over 8 or
13.6 inches.
Menu
Enter
Press ENTER to turn on the test pattern. Press ENTER again to turn the test
pattern off.
To exit the menu
Clear
First
Press the FIRST key.
Menu
Enter
Press the ENTER key.
FF / Load
To put top-of-form in front of print head (eject the partially covered page).
