Paper Handling Features and Techniques 10-5
Remove the paper motion detector plug (RJ 45) from the right side frame.
Reach inside the printer and grasp the tractor set by the rear tie rod.
Lift up on the rear tie rod until the tractor set snaps free of the end supports.
Move the tractor set forward to unhook it from the mounting rod.
Reinstall the rear door.
Re-attach the door restraining straps.
Change Paper Paths from the Control Panel
Tear off any forms in the current path.
The printer will retract up to one and one half times the form length or six inches whichever is
greater.
Park / Path
1
The printer parks the form in the current paper path.
Press and release the Park/Path key until the LCD shows the desired paper path
Wait three seconds for the function to time out
Fault:Paper Out
FF / Load
6
If there is paper in the selected path, the printer will load a form.
If the LCD still displays Fault:Paper Out.
If a form is loaded, press the Clear key. As shipped, the printer will clear a paper out fault
when a form is loaded. If software option 13 In the Print Menu is disabled, the fault must be
cleared from the control panel.
Remove the Tractor Set from the Rear Path
MOUNTING ROD
TRACTOR SET
TRACTOR SET
DISENGAGED
REAR TIE ROD
PAPER MOTION
DETECTOR PLUG
