Hardware Configuration Menu
C-1
Appendix C . Hardware Configuration Menu
The Hardware Configuration menu is a hidden submenu (item 99) on the main Printed Menu.
Use it to:
Change hardware options
Adjust the print wire flight time
To change a hardware option:
1. With the printer offline, press the Enter key to enter the LCD menu. The LCD displays
Prog : Exit
.
2. Press the UP ARROW once. The LCD displays
Prog : PrMenu
.
3. Press the ENTER key to print the main menu.
4. Press 9, 9, and ENTER to print the hardware options menu.
5. Press 2 then ENTER to enter the hardware options menu.
6. To select or deselect an option, press the numbered key(s) for the number of the option
to be changed and press menu.
7. When all changes are made, exit through the main menu.
Adjust the print wire flight time.
Directions for adjusting the flight-time compensation of the print wires are found in “Adjust the
Flight-Time Compensation” in Chapter 11.
