-8
Example
The following example enables flow control on port 5.
Related Commands
negotiation (3-4)
capabilities (flowcontrol, symmetric) (3-5)
combo-forced-mode
This command forces the port type selected for combination ports 8 - 12.
Use the
no
form to restore the default mode.
Syntax
combo-forced-mode
mode
no combo-forced-mode
•
mode
-
copper-forced
- Always uses the built-in RJ-45 port.
-
copper-preferred-auto
- Uses the built-in RJ-45 port if both
combination types are functioning and the RJ-45 port has a valid
link.
-
sfp-forced
- Always uses the SFP port (even if module not
installed).
-
sfp-preferred-auto
- Uses SFP port if both combination types are
functioning and the SFP port has a valid link.
Default Setting
sfp-preferred-auto
Command Mode
Interface Configuration (Ethernet)
Console(config)#interface ethernet 1/5
Console(config-if)#flowcontrol
Console(config-if)#no negotiation
Console(config-if)#
Summary of Contents for 8612XL3
