C
OMMAND
L
INE
I
NTERFACE
4-174
Syntax
hardware-address
hardware-address type
no hardware-address
•
hardware-address
- Specifies the MAC address of the client device.
•
type
- Indicates the following protocol used on the client device:
- ethernet
- ieee802
- fddi
Default Setting
If no type is specified, the default protocol is Ethernet.
Command Mode
DHCP Pool Configuration
Command Usage
This command identifies a DHCP or BOOTP client to bind to an
address specified in the
host
command. BOOTP clients cannot
transmit a client identifier. To bind an address to a BOOTP client, you
must associate a hardware address with the host entry.
Example
Related Commands
host (3-170)
clear ip dhcp binding
Use this command to delete an automatic address binding from the DHCP
server database.
Syntax
clear ip dhcp binding
{
address
|
*
}
Console(config-dhcp)#hardware-address 00-e0-29-94-34-28 ethernet
Console(config-dhcp)#
Summary of Contents for 8612XL3
