-210
show ip pim interface
Use this command to display information about interfaces configured for
PIM.
Syntax
show ip pim interface
vlan-id
vlan-id
- VLAN ID (Range: 1-4094)
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the PIM settings for the specified interface as
described in the preceding pages. It also shows the address of the
designated PIM router and the number of neighboring PIM routers.
Example
show ip pim neighbor
Use this command to display information about PIM neighbors.
Syntax
show ip pim neighbor
[
ip-address
]
ip-address
- IP address of a PIM neighbor.
Default Setting
Displays information for all known PIM neighbors.
Console#show ip pim interface 1
Vlan 1 is up
PIM is enabled, mode is Dense.
Internet address is 10.1.0.253.
Hello time interval is 30 sec, trigger hello time interval is 5 sec.
Hello holdtime is 105 sec.
Join/Prune holdtime is 210 sec.
Graft retry interval is 3 sec, max graft retries is 2.
DR Internet address is 10.1.0.254, neighbor count is 1.
Console#
Summary of Contents for 8612XL3
