-200
The default settings are shown in the following example:
show ip dvmrp route
Use this command to display all entries in the DVMRP routing table.
Command Mode
Normal Exec, Privileged Exec
Example
DMVRP routes are shown in the following example:
Console#show route dvmrp
Admin Status : enable
Probe Interval : 10
Nbr expire : 35
Minimum Flash Update Interval : 5
prune lifetime : 7200
route report : 60
Default Gateway : 0.0.0.0
Metric of Default Gateway : 1
Console#
Console#show ip dvmrp route
Source Mask Upstream_nbr Interface Metric UpTime Expire
--------------- --------------- --------------- --------- ------ ------
------
10.1.0.0 255.255.255.0 10.1.0.253 vlan1 1 84438 0
10.1.1.0 255.255.255.0 10.1.1.253 vlan2 1 84987 0
10.1.8.0 255.255.255.0 10.1.0.254 vlan1 2 19729 97
Console#
Field
Description
Source
IP subnetwork that contains a multicast source, an upstream router, or an
outgoing interface connected to multicast hosts.
Mask
Subnet mask that is used for the source address. This mask identifies the
host address bits used for routing to specific subnets.
Upstream_nbr The IP address of the network device immediately upstream for one or
more multicast groups.
Interface
The IP interface on this router that connects to the upstream neighbor.
Metric
The metric for this interface used to calculate distance vectors.
Summary of Contents for 8612XL3
