-116
IP Interface Commands
There are no IP addresses assigned to this router by default. You must
manually configure a new address to manage the router over your network
or to connect the router to existing IP subnets. You may also need to a
establish a default gateway between this device and management stations
or other devices that exist on another network segment (if routing is not
enabled).
This section includes commands for configuring IP interfaces, the Address
Resolution Protocol (ARP) and Proxy ARP. These commands are used to
connect subnetworks to the enterprise network.
Basic IP Configuration
ip address
This command sets the IP address for the currently selected VLAN
interface. Use the
no
form to restore the default IP address.
Command Group
Function
Pag
e
Basic IP
Configuration
Configures the IP address for interfaces and the gateway
router
3-11
6
Address Resolution
Protocol (ARP)
Configures static, dynamic and proxy ARP service
3-12
2
Command
Function
Mod
e
Page
ip address
Sets the IP address for the current interface
IC
3-116
ip default-gateway
Defines the default gateway through which this router
can reach other subnetworks
GC
3-118
show ip interface
Displays the IP settings for this device
PE
3-119
show ip redirects
Displays the default gateway configured for this device PE
3-120
ping
Sends ICMP echo request packets to another node on
the network
NE,
PE
3-120
Summary of Contents for 8612XL3
