M
ULTICAST
R
OUTING
3-329
Web
– Click Routing Protocol, DVMRP, General Settings. Enable or
disable DVMRP. Set the global parameters that control neighbor timeout,
the exchange of routing information, or the prune lifetime, and click
Apply.
CLI
– This sets the global parameters for DVMRP and displays the
current settings.
Configuring DVMRP Interface Settings
To fully enable DVMRP, you need to enable multicast routing globally for
the router (page 3-319), enable DVMRP globally for the router
Console(config)#router dvmrp
3-191
Console(config-router)#probe-interval 30
3-192
Console(config-router)#nbr-timeout 40
3-193
Console(config-router)#report-interval 90
3-194
Console(config-router)#flash-update-interval 10
3-194
Console(config-router)#prune-lifetime 5000
3-195
Console(config-router)#default-gateway 10.1.0.253
3-196
Console(config-router)#end
Console#show router dvmrp
3-199
Admin Status : enable
Probe Interval : 10
Nbr expire : 35
Minimum Flash Update Interval : 5
prune lifetime : 7200
route report : 60
Default Gateway :
Console#
Summary of Contents for 8612XL3
