D
YNAMIC
H
OST
C
ONFIGURATION
P
ROTOCOL
3-221
Configuring a Network Address Pool
Web
– Click DHCP, Server, Pool Configuration. Click the Configure
button for any entry. Click the radio button for “Network.” Enter the IP
address and subnet mask for the network pool. Configure the optional
parameters such as gateway server and DNS server. Then click Apply.
CLI
– This example configures a network address pool.
Console(config)#ip dhcp pool tps
3-162
Console(config-dhcp)#network 10.1.0.0 255.255.255.0
3-163
Console(config-dhcp)#default-router 10.1.0.253
3-164
Console(config-dhcp)#dns-server 10.2.3.4
3-165
Console(config-dhcp)#netbios-name-server 10.1.0.33
3-167
Console(config-dhcp)#netbios-node-type hybrid
3-168
Console(config-dhcp)#domain-name example.com
3-165
Console(config-dhcp)#bootfile wme.bat
3-167
Console(config-dhcp)#next-server 10.1.0.21
3-166
Console(config-dhcp)#lease infinite
3-170
Console(config-dhcp)#
Summary of Contents for 8612XL3
