SNMP C
OMMANDS
4-151
are sent. In order to configure the switch to send SNMP notifications,
you must enter at least one
snmp-server host
command. In order to
enable multiple hosts, you must issue a separate
snmp-server host
command for each host.
• The
snmp-server host
command is used in conjunction with the
snmp-server enable traps
command. Use the
snmp-server enable
traps
command to specify which SNMP notifications are sent globally.
For a host to receive notifications, at least one
snmp-server enable
traps
command and the
snmp-server host
command for that host
must be enabled.
• Some notification types cannot be controlled with the
snmp-server
enable traps
command. For example, some notification types are
always enabled.
• The switch can send SNMP version 1 or version 2c notifications to a
host IP address, depending on the SNMP version that the management
station supports. If the snmp-server host command does not specify
the SNMP version, the default is to send SNMP version 1 notifications.
Example
Related Commands
snmp-server enable traps (3-151)
snmp-server enable traps
This command enables this device to send Simple Network Management
Protocol traps (SNMP notifications). Use the
no
form to disable SNMP
notifications.
Syntax
[
no
]
snmp-server enable traps
[
authentication
|
link-up-down
]
•
authentication
- Keyword to issue authentication failure traps.
•
link-up-down
- Keyword to issue link-up or link-down traps.
The link-up-down trap can only be enabled/disabled via the CLI.
Console(config)#snmp-server host 10.1.19.23 batman
Console(config)#
Summary of Contents for 8612XL3
