-186
•
interface
•
ethernet
unit
/
port
-
unit
- This is device 1.
-
port
- Port number.
•
port-channel
channel-id
(Range: 1-6)
Default Setting
No static multicast router ports are configured.
Command Mode
Global Configuration
Command Usage
Depending on your network connections, IGMP snooping may not
always be able to locate the IGMP querier. Therefore, if the IGMP
querier is a known multicast router/switch connected over the network
to an interface (port or trunk) on your router, you can manually
configure that interface to join all the current multicast groups.
Example
The following shows how to configure port 11 as a multicast router port
within VLAN 1:
show ip igmp snooping mrouter
Use this command to display information on statically configured and
dynamically learned multicast router ports.
Syntax
show ip igmp snooping mrouter
[
vlan
vlan-id
]
vlan-id
- VLAN ID (Range: 1-4094)
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
Console(config)#
Summary of Contents for 8612XL3
