-102
Example
The following shows how to configure the query count to 10:
Related Commands
ip igmp snooping query-max-response-time (3-102)
ip igmp snooping query-interval
This command configures the query interval. Use the
no
form to restore
the default.
Syntax
ip igmp snooping query-interval
seconds
no ip igmp snooping query-interval
seconds
- The frequency at which the switch sends IGMP host-query
messages. (Range: 60-125)
Default Setting
125 seconds
Command Mode
Global Configuration
Example
The following shows how to configure the query interval to 100 seconds:
ip igmp snooping query-max-response-time
This command configures the query report delay. Use the
no
form to
restore the default.
Console(config)#ip igmp snooping query-count 10
Console(config)#
Console(config)#ip igmp snooping query-interval 100
Console(config)#
Summary of Contents for 8612XL3
