S
PANNING
T
REE
C
OMMANDS
-45
Example
spanning-tree transmission-limit
This command configures the minimum interval between the transmission
of consecutive RSTP BPDUs. Use the
no
form to restore the default.
Syntax
spanning-tree transmission-limit
count
no spanning-tree transmission-limit
count
- The transmission limit in seconds. (Range: 1-10)
Default Setting
3
Command Mode
Global Configuration
Command Usage
This command limits the maximum transmission rate for BPDUs.
Example
This command
spanning-tree spanning-disabled
This command disables the spanning tree algorithm for the specified
interface. Use the
no
form to reenable the spanning tree algorithm for the
specified interface.
Syntax
[
no
]
spanning-tree spanning-disabled
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#spanning-tree pathcost method long
Console(config)#
Console(config)#spanning-tree transmission-limit 4
Console(config)#
Summary of Contents for 8612XL3
