C
ONFIGURING
THE
S
WITCH
3-196
You can use the Multicast Router Port Information page to display the
ports on this switch attached to a neighboring multicast router/switch for
each VLAN ID.
Command Attributes
•
VLAN
ID
– ID of configured VLAN (1-4094).
•
Multicast Router List
– Multicast routers dynamically discovered by
this switch or those that are statically assigned to an interface on this
switch.
Web
– Click IGMP Snooping, Multicast Router Port Information. Select
the required VLAN ID from the scroll-down list to display the associated
multicast routers.
CLI
– This example shows that Port 11 has been statically configured as a
port attached to a multicast router.
Specifying Static Interfaces for a Multicast Router
Depending on your network connections, IGMP snooping may not always
be able to locate the IGMP querier. Therefore, if the IGMP querier is a
known multicast router/ switch connected over the network to an
Console#show ip igmp snooping mrouter vlan 1
3-106
VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/11 Static
Summary of Contents for 8612XL3
