-136
Syntax
version
{
1
|
2
}
no version
•
1
- RIP Version 1
•
2
- RIP Version 2
Command Mode
Router Configuration
Default Setting
RIP Version 1
Command Usage
• When this command is used to specify a global RIP version, any VLAN
interface not previously set by the
ip rip receive version
or
ip rip send
version
command
will be set to the following values:
- RIP Version 1 configures the unset interfaces to send RIPv1
compatible protocol messages and receive either RIPv1 or RIPv2
protocol messages.
- RIP Version 2 configures the unset interfaces to use RIPv2 for both
sending and receiving protocol messages.
• When the
no
form of this command is used to restore the default value,
any VLAN interface not previously set by the
ip rip receive version
or
ip rip send version
command
will be set to the default send or
receive version.
Example
This example sets the global version for RIP to send and receive version 2
packets.
Related Commands
ip rip receive version (3-137)
ip rip send version (3-138)
Console(config-router)#version 2
Console(config-router)#
Summary of Contents for 8612XL3
