C
LASS
OF
S
ERVICE
C
ONFIGURATION
3-185
Mapping IP Port Priority
You can also map network applications to Class of Service values based on
the IP port number (i.e., TCP/UDP port number) in the frame header.
Some of the more common TCP service ports include: HTTP: 80,
FTP: 21, Telnet: 23 and POP3: 110.
Command Attributes
•
IP Port Priority Status
– Enables or disables the IP port priority.
•
Interface
– Selects the port or trunk interface to which the settings
apply.
•
IP Port Priority Table
– Shows the IP port to CoS map.
•
IP Port Number (TCP/UDP)
– Set a new IP port number.
•
Class of Service Value
– Sets a CoS value for a new IP port. Note that
“0” represents low priority and “7” represent high priority.
Note:
IP Port Priority settings apply to all interfaces.
Web
– Click Priority, IP Port Status. Set IP Port Priority Status to Enabled.
Click Priority, IP Port Priority. Select a port or trunk from the Interface
field. Enter the port number for a network application in the IP Port
Number box and the new CoS value in the Class of Service box, and then
click Add IP Port.
Summary of Contents for 8612XL3
