A
UTHENTICATION
C
OMMANDS
4-109
Command Mode
Global Configuration
Example
dot1x timeout re-authperiod
This command sets the time period after which a connected client must be
re-authenticated.
Syntax
dot1x timeout re-authperiod
seconds
no dot1x timeout re-authperiod
seconds -
The number of seconds. (Range: 1-65535)
Default
3600 seconds
Command Mode
Global Configuration
Example
dot1x timeout tx-period
This command sets the time that the switch waits during an authentication
session before re-transmitting an EAP packet. Use the
no
form to reset to
the default value.
Syntax
dot1x timeout tx-period
seconds
no dot1x timeout tx-period
seconds -
The number of seconds. (Range: 1-65535)
Console(config)#dot1x timeout quiet-period 350
Console(config)#
Console(config)#dot1x timeout re-authperiod 300
Console(config)#
Summary of Contents for 8612XL3
