-134
network.
Example
This example sets the update timer to 40 seconds. The timeout timer is
subsequently set to 240 seconds, and the garbage-collection timer to 160
seconds.
network
Use this command to specify the network interfaces that will be included
in the RIP routing process. Use the
no
form to remove an entry.
Syntax
network
subnet-address
no network
subnet-address
subnet-address
– IP address of a network directly connected to this router.
Command Mode
Router Configuration
Default Setting
No networks are specified.
Command Usage
• RIP only sends updates to interfaces specified by this command.
• Subnet addresses are interpreted as class A, B or C, based on the first
field in the specified address. In other words, if a subnet address
nnn.xxx.xxx.xxx is entered, the first field (nnn) determines the class:
0 - 127 is class A, and only the first field in the network address is used.
128 - 19 is class B, and the first two fields in the network address are
used.
192 - 223 is class C, and the first three fields in the network address are
used.
Console(config-router)#timers basic 15
Console(config-router)#
Summary of Contents for 8612XL3
