M
ULTICAST
F
ILTERING
3-197
interface (port or trunk) on your switch, you can manually configure the
interface (and a specified VLAN) to join all the current multicast groups
supported by the attached router. This can ensure that multicast traffic is
passed to all the appropriate interfaces within the switch.
Command Attributes
•
Interface
– Activates the Port or Trunk scroll down list.
•
VLAN ID
– Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router.
•
Port
or
Trunk
– Specifies the interface attached to a multicast router.
Web
– Click IGMP Snooping, Static Multicast Router Port Configuration.
Specify the interfaces attached to a multicast router, indicate the VLAN
which will forward all the corresponding multicast traffic, and then click
Add. After you have finished adding interfaces to the list, click Apply.
CLI
– This example configures port 11 as a multicast router port within
VLAN 1.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11
3-105
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1
3-106
VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/11 Static
Summary of Contents for 8612XL3
