C
ONFIGURING
THE
S
WITCH
3-254
Web -
Click IP, General, Routing Interface. Specify an IP interface for each
VLAN that will support routing to other subnets. First specify a primary
address, and click Set IP Configuration. If you need to assign secondary
addresses, enter these addresses one at a time, and click Set IP
Configuration after entering each address.
CLI -
This example sets a primary IP address for VLAN 1, and then adds
a secondary IP address for a different subnet also attached to this router
interface.
Console(config)#interface vlan 1
Console(config-if)#ip address 10.1.0.253 255.255.255.0
3-116
Console(config-if)#ip address 10.1.9.253 255.255.255.0 secondary
Console(config-if)#
Summary of Contents for 8612XL3
