I
NTERFACE
C
OMMANDS
-15
Default Setting
Shows all interfaces.
Command Mode
Normal Exec, Privileged Exec
Command Usage
If no interface is specified, information on all interfaces is displayed.
Example
This example shows the configuration setting for port 4.
Console#show interfaces switchport ethernet 1/4
Broadcast threshold: Enabled, 500 packets/second
Lacp status: Disabled
Ingress rate limit: disable,1000M bits per second
Egress rate limit: disable,1000M bits per second
VLAN membership mode: Hybrid
Ingress rule: Disabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Console#
Field
Description
Broadcast threshold
Shows if broadcast storm suppression is enabled or disabled; if
enabled it also shows the threshold level (page 3-9).
Lacp status
Shows if Link Aggregation Control Protocol has been enabled or
disabled (page 3-22).
Ingress/Egress rate
limit
Shows if rate limiting is enabled, and the current rate limit
(page 3-19).
VLAN membership
mode
Indicates membership mode as Trunk or Hybrid (page 3-58).
Ingress rule
Shows if ingress filtering is enabled or disabled (page 3-60).
Acceptable frame type Shows if acceptable VLAN frames include all types or tagged
frames only (page 3-59).
Native VLAN
Indicates the default Port VLAN ID (page 3-61).
Summary of Contents for 8612XL3
