-26
• Once the remote side of a link has been established, LACP operational
settings are already in use on that side. Configuring LACP settings for
the partner only applys to its administrative state, not its operational
state, and will only take effect the next time an aggregate link is
established with the partner.
Example
lacp admin-key
(Port Channel)
This command configures a port channel's LACP administration key
string. Use the
no
form to restore the default setting.
Syntax
lacp admin-key
key
[
no
]
lacp admin-key
key
- The port channel admin key is used to identify a specific link
aggregation group (LAG) during local LACP setup on this switch.
(Range: 0-65535)
Default Setting
0
Command Mode
Interface Configuration (Port Channel)
Command Usage
• Ports are only allowed to join the same LAG if (1) the LACP system
priority matches, (2) the LACP port admin key matches, and (3) the
LACP port channel key matches (if configured).
• If the port channel admin key (
lacp admin key
- Port Channel) is not
set when a channel group is formed (i.e., it has the null value of 0), this
key is set to the same value as the port admin key (
lacp admin key
-
Ethernet Interface) used by the interfaces that joined the group. Note
Console(config)#interface ethernet 1/5
Console(config-if)#lacp actor admin-key 120
Console(config-if)#
Summary of Contents for 8612XL3
