M
ULTICAST
R
OUTING
3-331
Web
– Click Routing Protocol, DVMRP, Interface Settings. Select a VLAN
from the drop-down box under DVMRP Interface Settings, modify the
Metric if required, set the Status to Enabled or Disabled, and click Apply.
CLI
– This example enables DVMRP and sets the metric for VLAN 1.
Displaying Neighbor Information
You can display all the neighboring DVMRP routers.
Command Attributes
•
Neighbor Address
– The IP address of the network device
immediately upstream for this multicast delivery tree.
•
Interface
– The IP interface on this router that connects to the
Console(config)#interface vlan 1
3-1
Console(config-if)#ip dvmrp
3-197
Console(config-if)#ip dvmrp metric 2
3-198
Console(config-if)#end
Console#show ip dvmrp interface
3-202
Vlan 1 is up
DVMRP is enabled
Metric is 2
Console#
Summary of Contents for 8612XL3
