C
OMMAND
L
INE
I
NTERFACE
4-172
Usage Guidelines
• Host addresses must fall within the range specified for an existing
network pool.
• When a client request is received, the switch first checks for a network
address pool matching the gateway where the request originated (i.e., if
the request was forwarded by a relay server). If there is no gateway in
the client request (i.e., the request was not forwarded by a relay server),
the switch searches for a network pool matching the interface through
which the client request was received. It then searches for a manually
configured host address that falls within the matching network pool.
• When searching for a manual binding, the switch compares the client
identifier for DHCP clients, and then compares the hardware address
for DHCP or BOOTP clients.
• If no manual binding has been specified for a host entry with the
client-identifier
or
hardware-address
commands, then the switch
will assign an address from the matching network pool.
• If the mask is unspecified, DHCP examines its address pools. If no
mask is found in the pool database, the Class A, B, or C natural mask
is used (see page 3-276). This command is valid for manual bindings
only.
• The
no host
command only clears the address from the DHCP server
database. It does not cancel the IP address currently in use by the host.
Example
Related Commands
client-identifier (3-172)
hardware-address (3-173)
client-identifier
Use this command to specify the client identifier of a DHCP client. Use
the
no
form to remove the client identifier.
Console(config-dhcp)#host 10.1.0.21 255.255.255.0
Console(config-dhcp)#
Summary of Contents for 8612XL3
