C
OMMAND
L
INE
I
NTERFACE
4-122
Syntax
[
no
]
access-list ip mask-precedence
{
in
|
out
}
•
in
– Ingress mask for ingress ACLs.
•
out
– Egress mask for egress ACLs.
Default Setting
Default system mask: Filter inbound packets according to specified IP
ACLs.
Command Mode
Global Configuration
Command Usage
• A mask can only be used by all ingress ACLs or all egress ACLs.
• The precedence of the ACL rules applied to a packet is not determined
by order of the rules, but instead by the order of the masks; i.e., the first
mask that matches a rule will determine the rule that is applied to a
packet.
• You must configure a mask for an ACL rule before you can bind it to
a port or set the queue or frame priorities associated with the rule.
Example
Related Commands
mask (IP ACL) (3-122)
ip access-group (3-127)
mask
(IP ACL)
This command defines a mask for IP ACLs. This mask defines the fields to
check in the IP header. Use the
no
form to remove a mask.
Console(config)#access-list ip mask-precedence in
Console(config-ip-mask-acl)#
Summary of Contents for 8612XL3
