-130
Command Usage
If the
address
is specified without the
netmask
parameter, the router
displays all routes for the corresponding natural class address
(page 3-134).
Example
show ip traffic
Use this command to display statistics for IP, ICMP, UDP, TCP and ARP
protocols.
Command Mode
Privileged Exec
Command Usage
For a description of the information shown by this command, see
“Displaying Statistics for IP Protocols” on page 3-263.
Console#show ip route
Ip Address Netmask Next Hop Protocol Metric Interface
--------------- --------------- --------------- ---------- ------ ---------
0.0.0.0 0.0.0.0 10.2.48.102 static 0 1
10.2.48.2 255.255.252.0 10.2.48.16 local 0 1
10.2.5.6 255.255.255.0 10.2.8.12 RIP 1 2
10.3.9.1 255.255.255.0 10.2.9.254 OSPF-intra 2 3
Total entry: 4
Console#
Field
Description
Ip Address IP address of the destination network, subnetwork, or host. Note that the
address 0.0.0.0 indicates the default gateway for this router.
Netmask
Network mask for the associated IP subnet.
Next Hop IP address of the next hop (or gateway) used for this route.
Protocol
The protocol which generated this route information. (Values: static, local,
RIP, OSPF)
Metric
Cost for this interface.
Interface
VLAN interface through which this address can be reached.
Summary of Contents for 8612XL3
