-170
Command Mode
Interface Configuration (VLAN)
Default Setting
1 second
Command Usage
LSAs have their age incremented by this delay before transmission.
When estimating the transmit delay, consider both the transmission and
propagation delays for an interface. Set the transmit delay according to
link speed, using larger values for lower-speed links. The transmit delay
must be the same for all routers attached to an autonomous system.
Example
show ip ospf
Use this command to show basic information about the routing
configuration.
Command Mode
Privileged Exec
Example
Console(config)#interface vlan 1
Console(config-if)#ip ospf transmit-delay 6
Console(config-if)#
Console#show ip ospf
Routing Process with ID 10.1.1.253
Supports only single TOS(TOS0) route
It is an area border and autonomous system boundary router
Redistributing External Routes from,
rip with metric mapped to 10
Number of area in this router is 2
Area 0.0.0.0 (BACKBONE)
Number of interfaces in this area is 1
SPF algorithm executed 19 times
Area 10.1.0.0
Number of interfaces in this area is 4
SPF algorithm executed 19 times
Console#
Summary of Contents for 8612XL3
