manualshive.com logo in svg

Skoda Rapid NH 2014, Workshop Manual

The Skoda Rapid NH 2014 Workshop Manual is a comprehensive guide designed to assist users in the maintenance, repair, and troubleshooting of their vehicle. This manual provides detailed instructions and diagrams, allowing for efficient and reliable DIY car maintenance. Download this invaluable resource for free from manualshive.com.

Share
Download
background image

1.2

Removing and installing the interior rear-view mirror   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

1.3

Glueing the retaining plate for the interior rear-view mirror   . . . . . . . . . . . . . . . . . . . . . . . . 199

2

Covers, storage areas and trim panels   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

2.1

Tools   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

2.2

Centre console   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

2.3

Summary of components – armrest   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

2.4

Removing and installing the sustainer (vehicles with armrest)   . . . . . . . . . . . . . . . . . . . . . . 205

2.5

Removing and installing the armrest   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206

2.6

Removing and installing the sun visor   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208

3

Recessed handles   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

3.1

Removing and installing the recessed handles of the roof   . . . . . . . . . . . . . . . . . . . . . . . . . . 210

69 - Passenger protection   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

1

Seat belts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

1.1

Removing and installing the front seat belts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

1.2

Removing and installing the front seat belt height adjuster   . . . . . . . . . . . . . . . . . . . . . . . . 214

1.3

Removing and installing the front seat belt buckle   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214

1.4

Removing and installing the front seat belt buckle   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

1.5

Removing and installing the outer rear seat belts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216

1.6

Removing and installing the rear middle seat belt   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 218

1.7

Removing and installing the rear seat belt buckle with lap belt   . . . . . . . . . . . . . . . . . . . . . . 218

1.8

Removing and installing the rear double belt buckle   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219

2

Inspect seat belts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

2.1

Test sequence   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220

2.2

Special instructions for the belt tensioner   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

2.3

Storage, transport and disposal of airbag, belt tensioner and battery separation units

(pyrotechnical components)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

3

Airbag   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

3.1

Tools   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

3.2

Airbag system - Overview   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 224

3.3

Observe the general safety instructions for working on airbag, belt tensioner and battery

separation units (pyrotechnical components)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225

3.4

Special instructions for driver and front passenger airbag   . . . . . . . . . . . . . . . . . . . . . . . . . . 226

3.5

Storage, transport and disposal of airbag, belt tensioner and battery separation units

(pyrotechnical components)   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226

3.6

Replacing parts of the airbag system   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

3.7

Removing and installing the airbag control unit    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228

3.8

After replacement, configure the control unit   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 229

3.9

Installing and removing sensor for side impact on the B-pillar   . . . . . . . . . . . . . . . . . . . . . . 230

3.10 Installing and removing sensor for side impact on the C-pillar   . . . . . . . . . . . . . . . . . . . . . . 230

3.11 Removing and installing front passenger airbag key switch   . . . . . . . . . . . . . . . . . . . . . . . . 231

3.12 Summary of components of steering wheel   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 232

3.13 Removing and installing driver airbag unit   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

3.14 Removing and installing restoring ring with slip ring   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

3.15 Removing and installing airbag unit on the passenger side   . . . . . . . . . . . . . . . . . . . . . . . . 235

3.16 Removing and installing side airbag   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

3.17 Head airbag   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

70 - Trim, insulation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

1

Dash panel   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

1.1

Removing and installing the dash panel   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244

1.2

Removing and installing the glove compartment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 249

1.3

Removing and installing the steering column trim panel   . . . . . . . . . . . . . . . . . . . . . . . . . . 251

1.4

Removing and installing the decorative trim of the dash panel   . . . . . . . . . . . . . . . . . . . . . . 251

1.5

Removing and installing the cross member for the dash panel   . . . . . . . . . . . . . . . . . . . . . . 252

1.6

Removing and installing impact absorbers   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤

Body Work - Edition 10.2018

iv

    Contents

Summary of Contents for Rapid NH 2014
































































































































































































































































































































Reviews:

No comments

Related manuals for Rapid NH 2014

Laser 4832 Manual preview
4832
Brand: Laser Pages: 8
Victory 4x4 5TH GEN 4RUNNER Install Instructions preview
5TH GEN 4RUNNER
Brand: Victory 4x4 Pages: 5
Keith WALKING FLOOR Helpful Hints preview
WALKING FLOOR
Brand: Keith Pages: 2
Brodit ProClip 853660 Manual preview
ProClip 853660
Brand: Brodit Pages: 2
Power Fist 8985988 Manual preview
8985988
Brand: Power Fist Pages: 12
EAL EUFAB 16491 Operating Instructions Manual preview
EUFAB 16491
Brand: EAL Pages: 7
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
Mazda 2008 B2300 Truck Owner'S Manual preview
2008 B2300 Truck
Brand: Mazda Pages: 280
ADS FlashLogic FLC-FORS-FO1B-FLRSFO1-EN Install Manual preview
FlashLogic FLC-FORS-FO1B-FLRSFO1-EN
Brand: ADS Pages: 25
Toyota Solara guide Owner'S Manual preview
Solara guide
Brand: Toyota Pages: 497
HAKR TRIP 3 Instructions For Use Manual preview
TRIP 3
Brand: HAKR Pages: 9
Ford 1999 Crown Victoria Owner'S Manual preview
1999 Crown Victoria
Brand: Ford Pages: 208
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
Truma Mover S Installation & Operation Instructions preview
Mover S
Brand: Truma Pages: 16

Brands by name

Popular brands

Load more brands