3
Rear bumper (Spacebook)
Summary of components
1 - Spacer sleeve for screw
2 - Lateral guide section
3 - Screw
– Tightening torque - 2.2
Nm.
4 - Rear guide profile
5 - Nut
– Tightening torque - 2.2
Nm.
6 - Bumper bracket (depending
upon vehicle equipment)
Removing
– Remove the rear bump‐
er
.
– Release screws
.
– Remove the bumper
bracket from the vehi‐
cle.
Installing
– The installation occurs
in reverse order.
7 - Impact absorber (depend‐
ing upon vehicle equipment)
❑ Secured with double-si‐
ded adhesive tape.
8 - Rear reflector
– Clipped into the bumper.
– The removal and installation is possible without removing the bumper.
9 - Spoiler
– Clipped into the bumper.
– Remove the bumper for the removal procedure
⇒ “2.1.2 Remove the rear bumper”, page 136
10 - Rear bumper
⇒ “2.1.2 Remove the rear bumper”, page 136
.
11 - Screw
– Tightening torque - 2 Nm.
12 - Screw
– Tightening torque - 20 Nm.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
3. Rear bumper (Spacebook)
139