2.4.1
Setting the locking mechanism
Note
♦
The closing wedge -2- can be moved in the oversized bores
-arrows a- and -arrows b- by loosening the screws - 1 -.
♦
Set the locking mechanism - 2 - in such a way that the recess
of the tailgate lock with the catch engages centrally in the
locking mechanism - 2 -.
– Release screws - 1 -.
– Push the locking mechanism -2- out into the upper position
and tighten the screws -1-.
– Close the tailgate and check the setting.
Tightening torque of screws -1- (20 Nm).
2.4.2
Adjusting the rubber buffer
– Adjust the rubber buffer in such a way that no excessive forces
must be used when closing the tailgate -1- and that it engages
in the lock.
– Remove rubber buffers -2- by approximately 2 mm out of the
tailgate -1-.
– The tailgate -1- must latch in the flap lock without using in‐
creased force.
2.5
Removing and installing the tailgate lock
Note
If the tailgate does not open, the emergency release can be
opened mechanically from the luggage compartment via the lock
cylinder ⇒ Owner's Manual .
2.5.1
Removing and installing
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
2. Tailgate
39