Skoda Rapid NH 2014, Workshop Manual

Page: 151 / 319

♦ Cutting tool - V.A.G 1351-
♦ Window removal set - V.A.G 1755-
♦ Hand pressure gun - V.A.G 1628-
♦ Cartridge heater - V.A.G 1939-
♦ Power knife - V.A.G 1561 A-
♦ Cutting knife - V.A.G 1561/2-
♦ Cutting knife - V.A.G 1561/8-
♦ Setting gauge - 3371-
♦ Cutting knife - V.A.G 1561/19-
♦ Double cartridge gun - VAS 5237-
♦ Cutting thread - 357 853 999 B-
♦ Cutting cord - 357 845 955-
1.2 Materials
Note
The part numbers of the materials are provided in the ⇒ Electronic
Catalogue of Original Parts - ETKA .
♦ 2K window pane adhesive
7)
1
8)
2
10)
4
12)
6
♦ 1K window pane adhesive
7)
1
8)
2
9)
3
11)
5
♦ Activator
7)
1
♦ Glass/paint primer
7)
1
♦ Cleaning solution
7)
1
♦ Primer applicator
7)
1
♦ Adhesive remover
7)
1
7) Observe the handling instructions in accordance with the specifications of the
manufacturer in the package insert.
8) Observe minimum hardening time.
9) According to manufacturer's instructions heat up e.g. with cartridge heater -
V.A.G 1939- .
10) Use for example the double cartridge gun - VAS 5237- for processing this
material.
11) Small cartridges 180 ml for sealing work, or if 400 ml cartridge is not adequate.
12) When using a 2K window pane component adhesive, remove the first 10 cm
of the pressed out adhesive in order to ensure the correct mixture of both com‐
ponents.
1.3 Windscreen - Summary of components
WARNING
For safety reasons, re-using a cut-out windscreen is not permis‐
sible. The windscreen must always be replaced with a new orig‐
inal part. The cut-out rear and side windows can be re-used after
a thorough inspection.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
1. Glued windows
143