manualshive.com logo in svg

Skoda Rapid NH 2014, Workshop Manual

The Skoda Rapid NH 2014 Workshop Manual is a comprehensive guide designed to assist users in the maintenance, repair, and troubleshooting of their vehicle. This manual provides detailed instructions and diagrams, allowing for efficient and reliable DIY car maintenance. Download this invaluable resource for free from manualshive.com.

Share
Download
background image

2.6

Removing and installing cap (without lock cylinder)    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

2.7

Removing and installing the door handle   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

2.8

Removing and installing the door lock   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

2.9

Removing and installing bearing bracket   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

2.10 Front door window   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

2.11 Removing and installing door window   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

2.12 Removing and installing window lifter motor   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

2.13 Remove and install window lifter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

2.14 Removing and installing the window run   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

2.15 Removing and installing the inner window channel strip   . . . . . . . . . . . . . . . . . . . . . . . . . . 80

2.16 Removing and installing the outer window channel strip   . . . . . . . . . . . . . . . . . . . . . . . . . . 81

2.17 Removing and installing the inside door seal   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

2.18 Removing and installing the outside door seal   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
3

Central locking   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

3.1

Adjustment of radio control keys   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

3.2

Summary of components – battery for the (foldable) radio control key    . . . . . . . . . . . . . . . . 85

3.3

Removing and installing the battery for the foldable key with radio remote control    . . . . . . 86

58 - Rear doors, door components   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

1

Rear door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

1.1

Assembly overview - door hanger   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

1.2

Removing and installing the door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

1.3

Door adjustment   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

2

Door internal parts   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

2.1

Summary of components   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

2.2

Removing and installing the cover   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

2.3

Removing and installing the door retaining strap   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

2.4

Removing and installing the locking clamp   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

2.5

Door handle and door lock - Summary of components    . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

2.6

Removing and installing the cap   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

2.7

Removing and installing the door handle   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

2.8

Removing and installing the door lock   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

2.9

Removing and installing bearing bracket   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

2.10 Rear door window   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

2.11 Removing and installing door window   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

2.12 Removing and installing window lifter motor   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

2.13 Removing and installing the manual drive   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

2.14 Removing and installing window crank   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

2.15 Remove and install window lifter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

2.16 Removing and installing the window run   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

2.17 Removing and installing the rear fixed door window   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

2.18 Removing and installing the rear fixed door window (Spaceback)   . . . . . . . . . . . . . . . . . . . . 120

2.19 Removing and installing the inner window channel strip   . . . . . . . . . . . . . . . . . . . . . . . . . . 121

2.20 Removing and installing the outer window channel strip   . . . . . . . . . . . . . . . . . . . . . . . . . . 123

2.21 Removing and installing the inside door seal   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

2.22 Removing and installing the outside door seal   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

60 - Sunroof   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

1

Panoramic roof   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

1.1

Summary of components of panoramic roof   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

1.2

Removing and installing panoramic roof   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

2

Removing and installing roof roller   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

3

Materials   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

63 - Bumpers   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤

Body Work - Edition 10.2018

ii

    Contents

Summary of Contents for Rapid NH 2014
































































































































































































































































































































Reviews:

No comments

Related manuals for Rapid NH 2014

Warrior Products 10936 Installation Instructions preview
10936
Brand: Warrior Products Pages: 3
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Whispbar K678W Fitting Instructions Manual preview
K678W
Brand: Whispbar Pages: 14
Tachosys digidl Installation Manual preview
digidl
Brand: Tachosys Pages: 28
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
Honda CRV 2015 Navigation Manual preview
CRV 2015
Brand: Honda Pages: 253
Toyota 2018 yaris Vehicle Instruction Card preview
2018 yaris
Brand: Toyota Pages: 11
Hyundai 2001 Elantra Owner'S Manual preview
2001 Elantra
Brand: Hyundai Pages: 168
Prorack K349 Fitting Instructions Manual preview
K349
Brand: Prorack Pages: 13
MMD 41240 Quick Manual preview
41240
Brand: MMD Pages: 3
Yakima LockNLoad LightenUp Manual preview
LockNLoad LightenUp
Brand: Yakima Pages: 13
RADICAL R-C10AD2 Device Installation Manual preview
R-C10AD2
Brand: RADICAL Pages: 11
Quadratec QRC Installation Manual preview
QRC
Brand: Quadratec Pages: 8
Valueline SVL-CARCAM11 User Manual preview
SVL-CARCAM11
Brand: Valueline Pages: 40
Jackson Racing 999-200 Installation Instructions Manual preview
999-200
Brand: Jackson Racing Pages: 14
SAF-HOLLAND SK-V 20 Mounting, Operation And Maintenance preview
SK-V 20
Brand: SAF-HOLLAND Pages: 22
Cadillac 2013 Cadillac CTS-V Specifications preview
2013 Cadillac CTS-V
Brand: Cadillac Pages: 6
ADAPT SOLUTIONS XL-SEAT XLS-DAKC05L Installation Manual preview
XL-SEAT XLS-DAKC05L
Brand: ADAPT SOLUTIONS Pages: 9

Brands by name

Popular brands

Load more brands