– Attach the attachment with tape approximately as shown.
– Remove the adhesive tapes from the endpiece after one hour.
– Remove queezed out parts of the adhesive cement, e.g with
a plastic spatula and clean with a cleaner.
Note
Do not drive into the carwash within 24 hours of gluing on the
attachments.
Remove side rail attachments
Note
♦
The side rail attachments cannot be removed without damage.
♦
After removaing the side rail, check the lacquer on the side
rail.
– Cover the painted surfaces in the attachment area with textile
adhesive tape.
– Remove all screws for picking up the end piece.
– Heat the glued connection points gradually with hot air blow‐
ers.
– Cut off the attachment with accessible workshop equipment
(cut through sealing material).
– Remove the old adhesive using a standard workshop tool and
an adhesive remover (if a new end piece is glued to the side
rail).
3.4
B-pillar trim panel
3.4.1
Summary of components
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
184
Rep. gr.66 - Exterior equipment