Skoda Rapid NH 2014, Workshop Manual

Page: 64 / 319

1 - Door lock
❑ Removing and installing
⇒ “2.8 Removing and in‐
stalling the door lock”,
page 65 .
2 - Screw
❑ For lock cylinder.
❑ Tightening torque - 3.5
Nm.
3 - Clamp
❑ Removing and installing
⇒ “2.9 Removing and in‐
stalling bearing brack‐
et”, page 67 .
4 - Lock cylinder
❑ Removing and installing
⇒ “2.5 Removing and in‐
stalling lock cylinder”,
page 57 .
❑ A lock cylinder is located
only on the driver's door.
5 - Washer
6 - Cap
❑ Remove and install with
lock cylinder
⇒ “2.4 Removing and in‐
stalling cap for lock cyl‐
inder”, page 57 .
❑ Remove and install
without lock cylinder
⇒ “2.6 Removing and in‐
stalling cap (without lock
cylinder) ”, page 60 .
7 - Door handle
❑ Removing and installing ⇒ “2.7 Removing and installing the door handle”, page 63 .
8 - Screw
❑ Tightening torque - 1.5 Nm.
❑ The bearing bracket is released from the door by loosening the screw.
9 - Control cable
❑ From door lock to bearing bracket.
10 - Control cable
❑ From inner door control to lock release.
❑ With grommet for feeding through at the cover.
11 - Screw
❑ Tightening torque - 20 Nm.
12 - Cap
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
56
Rep. gr.57 - Front doors, door components, central locking