1.3.2
Installing
Tools
1 - Glass scraper (commercially available)
2 - Blade (commercially available)
Carry out the following tasks
– Remove retaining plate from mirror pedestal.
– Remove PUR adhesive kit from the retaining plate with a wire
brush.
– Grind down the three distance knobs on the adherent. Place
abrasive paper (grain 360/400) on a flat surface.
– Sanded surfaces must be clean and free from grease.
– Using the glass scraper, scrape the old PUR adhesive and
glass/paint primer residues down to the ceramic layer on the
windscreen.
– Clean the bonding surface with glue remover - D 002 000 10-
or cleaning solution - D 009 401 04- .
WARNING
Do not damage the ceramic layer. Scratches remain visible.
– Cut a piece of nylon net fabric to the exact size of the retaining
plate.
Note
Wear hand protection (rubber gloves).
– Apply adhesive evenly on the retaining plate.
– Fit a piece of nylon net fabric onto the retaining plate.
– Continue applying adhesive by dabbing on the nylon net fab‐
ric.
Once the nylon net fabric is placed on the adhesive, you only have
30 seconds to press it onto the windscreen.
– Press the retaining plate steadily onto the windscreen for 15
seconds (do not force).
– Remove excess adhesive with a cloth.
Note
Install the interior rear-view mirror after 15 minutes.
Rapid NH 2014 ➤ , Rapid Spaceback 2014 ➤
Body Work - Edition 10.2018
200
Rep. gr.68 - Interior equipment
