![background image](http://html1.mh-extra.com/html/acura/08l03-ta1-200a/08l03-ta1-200a_installation-instructions_2844902001.webp)
© 2011 American Honda Motor Co., Inc. - All Rights Reserved.
BII 46293 (1108)
1 of 4
INSTALLATION
INSTRUCTIONS
Accessory
Application
Publications No.
Issue Date
AUG 2011
08L03-TA1-2000-91
2012 TSX
SPORT WAGON
SKI
ATTACHMENT
P/N 08L03-TA1-200A
PARTS LIST
2 Ski attachments
4 Knobs
4 Long T-bolts
BII 46293
1.
Pull open the end cap on each crossbar.
Put this information in the glove box with the vehicle owner's manual.
INSTALLATION
NOTE:
• The ski attachments are designed to be used
exclusively with Acura cross bars, which are sold
separately. If the vehicle is not equipped with cross
bars, install the recommended cross bars before
installing the ski attachment.
• The ski attachments may be installed with both on
the driver's side, or with both on the passenger's
side.
2.
Remove the rubber moldings from the front and
rear crossbars. Retain the rubber moldings to be
installed later.
4 Block spacers
Key
3.
Slide two bolts into each crossbar (front and rear).
Close the end caps.
FRONT
CROSS BAR
REAR
CROSS BAR
RUBBER
MOLDING
FRONT
CAP
Open.
RUBBER MOLDING
Slide.
FRONT
CROSS BAR
BOLT
FRONT