Rohde & Schwarz SMBV100B, User Manual

Page: 755 / 1030

Remote Control Commands
R&S
®
SMBV100B
753 User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:BB:ARBitrary:CLOCk <Clock>
Sets the clock rate.
If you load a waveform, the clock rate is determined as defined with the waveform tag
{CLOCK: frequency}
. This command subsequently changes the clock rate; see
data sheet for value range.
Parameters:
<Clock> float
Range:
depends on the installed options
Increment: 0.001
*RST:
1E6
Default unit: Hz
E.g. 400 Hz to 600 MHz
Example: See Example "Managing waveform files" on page 738.
Manual operation: See "Clock Frequency" on page 153
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CLOCk <Filename>, <Clock>
Appends information on the ARB clock rate to specified waveform file. The file must
contain I/Q and/or marker data and have been created with the command
:MMEMory:
DATA:UNPRotected
on page 624.
Parameters:
<Filename> string
Complete file path and file name with file extension (
*.wv
).
If the file is in the default directory, the file path can be omitted.
Setting parameters:
<Clock> float
Range:
400 to 100E6
Increment: 1E-3
*RST:
1E6
Example: see
:MMEMory:DATA:UNPRotected
on page 624
Multi-Segment Commands
Required options
See Chapter 3.7.1, "Required Options" , on page 193.
[:SOURce<hw>]:BB:ARBitrary:WSEGment?
..................................................................... 754
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NAME?
...........................................................754
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT
............................................................. 754
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:EXECute
............................................... 755
[:SOURce<hw>]:BB:ARBitrary:WSEGment:NEXT:SOURce
................................................ 755
[:SOURce<hw>]:BB:ARBitrary:WSEGment:LMODe
...........................................................755
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:SEGMent:CATalog?
........................ 755
SOURce Subsystem