manualshive.com logo in svg

Rohde & Schwarz SMBV100B, User Manual

Share
Download
Rohde & Schwarz SMBV100B User Manual Download Page 83

Getting Started

R&S

®

SMBV100B

81

User Manual 1178.4460.02 ─ 03

Completing the entry

► Press the [Enter] key or the rotary knob.

Aborting the entry

► Press the [Esc] key.

The dialog box closes without changing the settings.

2.5.5.1

 

Entering Numeric Parameters

To enter values with the on-screen keypad

For numeric settings, the instrument displays the numeric keypad. The units specified
correspond to the units of the parameter.

1. Enter the numeric value.

2. Tap the unit button to complete the entry.

The unit is added to the entry.

3. If the parameter does not require a unit, confirm the entered value by pressing

"Enter".

To enter values by using the front panel controls

1. Change the currently used parameter value by using the rotary knob or the [Up/

Down] keys.

2. If the parameter does not require a unit, confirm the entered value by pressing the

[Enter] key or any of the unit keys.
The instrument highlights the editing line to confirm the entry.

If you edit numeric data in tables, the entry field must be in edit mode: Press [Enter], or
the rotary knob to activate the edit mode.

2.5.5.2

 

Entering Alphanumeric Parameters

If a field requires alphanumeric input, you can use the on-screen keyboard to enter let-
ters and (special) characters.

2.5.5.3

 

Undo and Redo Actions

Accessed via the context-sensitive menus, "Undo" allows you to restore one or more
actions on the instrument. Depending on the available memory, the "Undo" steps can
restore all actions.

Instrument Control

Summary of Contents for SMBV100B







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands