Rohde & Schwarz SMBV100B, User Manual

Page: 592 / 1030

Network Operation and Remote Control
R&S
®
SMBV100B
590 User Manual 1178.4460.02 ─ 03
– Automatically record all performed steps
The instrument records the SCPI command and settings value of each step
you perform, and then writes the commands to the file system, see
How to
record SCPI lists automatically .
You can also add a SCPI command manually to the recording list during auto-
matic SCPI recording.
Note: The vector signal generator clears the SCPI list after booting automatically.
●
Generating all settings at once
Generates the SCPI commands of the current instrument settings in one step, and
writes the command list in a temporary list, see
How to create a SCPI list with the
current instrument settings in one step .
Note: This function lists all commands in alphabetical order, in contrast to the
recording or manual creation, which consider the order the settings are configured.
Using this function can slow down the runtime or cause errors during execution.
Therefore, always check and revise a script if necessary, see
"How to check an
SCPI list" on page 598.
●
Manually create a command script with "Copy" and paste
Enables you to copy the SCPI command and the current setting, see
Chap-
ter 11.11.1, "Show SCPI Command" , on page 591.
Some parameters cannot be set by an SCPI command.
If so,
no SCPI command found is entered instead of a command when you record or
generate all settings at once.
The difference between "Show SCPI Command" and the provided cross-refer-
ence
If you want to enter your settings in a script, or use a remote control program, you must
know the corresponding SCPI command and the exact syntax.
If you need to look up the SCPI command, the instrument offers two ways to figure it
out quickly.
●
"Show SCPI command" (context-sensitive menu)
Displays the SCPI command syntax of a selected parameter including the current
setting value, see
Chapter 11.12, "How to Find Out the SCPI Command Corre-
sponding to the Manual Operation via Show SCPI Command" , on page 594. The
"Copy" function enables you to write an SCPI script conveniently by hand.
●
Instrument help ([Help] key)
Opens a help topic that describes the selected parameter or instrument function,
including a cross-reference to the corresponding SCPI command. The reference
leads you to the description of the SCPI command comprising the complete SCPI
syntax, all available setting values, value ranges, etc., see
Chapter 11.13, "How to
Find Out the SCPI Command Corresponding to the Manual Operation Using the
Online Help"
, on page 594.
Automating Tasks with Remote Command Scripts