Rohde & Schwarz SMBV100B, User Manual

Page: 641 / 1030

Remote Control Commands
R&S
®
SMBV100B
639 User Manual 1178.4460.02 ─ 03
Setting parameters:
<DialogId> string
To find out the dialog identifier, use the query
:DISPlay:
DIALog:ID?
.
The
<DialogName>
part of the query result is mandatory.
Example: See Example "Querying the dialog IDs, opening and closing dia-
logs" on page 635
Usage: Setting only
Manual operation: See "SCPI" on page 529
:DISPlay:DIALog:CLOSe <DialogId>
Closes the specified dialog.
Setting parameters:
<DialogId> string
To find out the dialog identifier, use the query
:DISPlay:
DIALog:ID?
.
The
<DialogName>
part of the query result is sufficient.
Example: See Example "Querying the dialog IDs, opening and closing dia-
logs" on page 635
Usage: Setting only
:DISPlay:DIALog:CLOSe:ALL
Closes all open dialogs.
Example: See Example "Querying the dialog IDs, opening and closing dia-
logs" on page 635
Usage: Event
12.10 FORMat Subsystem
The commands in the
FORMat
subsystem determine the format of data returned by the
R&S SMBV100B to the controller. This affects all query commands that return a list of
numerical data or block data, noted in the descriptions of the commands. The set data
format applies to both paths.
:FORMat:BORDer
.......................................................................................................... 640
:FORMat:SREGister
.......................................................................................................640
:FORMat[:DATA]
............................................................................................................ 640
FORMat Subsystem